Phased out components
Why does EMG have to phase out components?
Products and solutions from EMG Automation represent modern engineering and technology around the world. The long-term use of all systems is guaranteed for many years thanks to the availability of support and spare parts. The limited storage life of certain components that have not been on the market for some time, however, means that EMG will no longer be able to guarantee the availability of these components after a certain point in time, despite our careful planning for the future.
Below you will find an overview of all currently discontinued products and the replacement solution offered by EMG for our QA systems.
EMG eBACS
| Year | Component | Follow up solution |
|---|---|---|
| 2021 | All components are available as spare parts until further notice. For new projects, the following configurations must be selected: | |
| BMI4/60/80/R/S.723 BMI4/60/80/L/S.723 SMI1.05 | ESI1_060_080_165H30RL_HG_-_1 ESI1_060_080_165H30LR_HG_-_1 SMI1.14 | |
| SMI1.13 | Not yet available | |
| BMI4/60/80/R/S.681 BMI4/60/80/L/S.681 | Only on request to check usability of BMI4/60/80/R/S.723 Only on request, to check usability of BMI4/60/80/R/S.723 | |
| Motor for drive family ESA10, machined, with pinion part no. 304661 (with motor part no. 168630) | Successor solution compatible for spare parts and new applications part no. 444423_E (with motor part no. 345522) from 01.10.2021 |
EMG eMASS®
| Year | Component | Follow up solution |
|---|---|---|
| 2017 | Power Panel PP420 5,7''TFT TOUCH (master) Part no.: 182752 | No longer available as spare part. Repair is possible until August 30th, 2027, if technically realisable. In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible. |
| 2017 | Profibus Interface 3IF66.9 Master (Profibus master) mounted in power panel PP420 Part no.: 182499 | No longer available as spare part. Repair is possible until August 30th, 2027, if technically realisable. In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible. |
| 2017 | APCI Interface 3IF791.9 (connection to slave displays) mounted in power panel PP420 Part no.: 182492 | No longer available as spare part. Repair is possible until August 30th, 2027, if technically realisable. In case of failure, the operation of eMASS® is not possible. To bridge the repair time, a chargeable software update is possible. |
| 2017 | Power Panel PP320 5,7''TFT TOUCH (slave) Part no.: 182751 | No longer available as spare part. Repair is possible until August 30th, 2027, if technically realisable. |
| 2017 | Power Panel PP320 15''TFT TOUCH (slave, optional at control pulpit) Part no.: 182774 | No longer available as spare part. Repair is possible until August 30th, 2027, if technically realisable. |
Is your component on the list? Don't panic!
EMG products are designed to have the longest service life. If the products in your production department have been performing their duties to date without any complaints, all indications are that they will continue to do so for a long time. On the rare occasion that a defect does occur, EMG offers modern alternatives that are available for all discontinued components. Not only do these offer enhanced options in terms of their use, but they also frequently enable existing sensor components to be reused or upgraded with very little effort.
You can also send us a spare parts inquiry directly.