;********************************************************************
;**     EMG_0725.GSD: GSD fuer das BST PDP-Modul		*****
;** ----------------------------------------------------------- *****
;**     Geraetestammdaten Datei ( GSD ) nach DIN E 19245 T3     *****
;**                                                             *****
;**     PDP-Modul : Interface zwischen dem BST-Modulbus und dem	*****
;**		    PROFIBUS-DP (Slave Anschaltung)	        *****
;**								*****
;**     Version 1.1.1 	 	                                *****
;**     	                                                *****
;**     EMG GmbH	         			        *****
;**     Ansprechpartner: ST-V                                   *****
;**     Industriestraße 1                                       *****
;**     57482 Wenden                                            *****
;**     Tel.: 02762 612 348                                     *****
;**     Fax : 02762 612 384                                     *****
;********************************************************************
;
#Profibus_DP
Vendor_Name = "EMG GmbH"
Model_Name = "PBB1.01-Modul"
Revision = "1.0.1"
Ident_Number = 0x0725
Protocol_Ident = 0			; PROFIBUS DP
Station_Type = 0			; DP Slave
FMS_supp = 0				; reines DP Modul
Hardware_Release = "01"
Software_Release = "HPS0076"
;
;unterstützte Baudraten
9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
Redundancy = 0
Repeater_Ctrl_Sig = 2
24V_Pins = 0
;
;********************************************************************
;**   Slave spezifische Werte					*****
;********************************************************************
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0		; Adresse nicht veraenderbar
User_Prm_Data_Len = 0x05
User_Prm_Data = 0x00,0x00,0x00,0x00,0x00
Min_Slave_Intervall = 1		; Basis 100us
;
;********************************************************************
;**   Modularer Teilnehmer					*****
;********************************************************************
Modular_Station = 1
Max_Module = 0x01
Max_Input_Len = 0x20
Max_Output_Len = 0x20
Max_Data_Len = 0x0040
;
;Modul Protokoll 1
Module= "Protokoll 1 /  4 Worte E/A" 0xF3
EndModule
;Modul Protokoll 2 
Module= "Protokoll 2 /  6 Worte E/A" 0xF5
EndModule
;Modul Protokoll 3 
Module= "Protokoll 3 /  8 Worte E/A" 0xF7
EndModule
;Modul Protokoll 4 
Module= "Protokoll 4 / 10 Worte E/A" 0xF9
EndModule
;Modul Protokoll 5
Module= "Protokoll 5 / 16 Worte E/A" 0xFF
EndModule
;
;********************************************************************
;**   Ende der GSD-Datei					*****
;********************************************************************