;*****************************************************************************
; Device data sheet for UMC-16 Profibus-DP Interface PDP01
; Vendor: Elektro-Mechanik GmbH, Industriestr. 1, 57482 Wenden / Germany
; Tel.: +49-(0)2762/612-0
; Contact: Dep. ST-E
; Release: 2.03.2000                                       
;*****************************************************************************
; GSD-Revision: 0     23.3.98 -G/E2-
;                     - Input/Output modules supports only words
;                     - max. modules = 64
;                     - Revision "V 1.1"
;                     - Hard-/Softwarerelease "V 1.1"
; GSD-Revision: 1     2.3.2000 -G/DE-
;                     - Device-Bitmap/GSD_Revision/Revision_Number added

#Profibus_DP
GSD_Revision = 1
Vendor_Name = "EMG, Wenden"
Model_Name = "UMC-16 PDP01"
Revision = "V 1.1"
Revision_Number = 0
Ident_Number = 0x0685
Protocol_Ident = 0                      ;PROFIBUS-DP
Station_Type = 0                        ;DP Slave
FMS_supp = 0                            ;FMS is not supported
Hardware_Release = "V 1.1"
Software_Release = "V 1.1"

; supp. Baudrate
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1

;Default TSDR
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "SPC3"

; Slave Parameter
Freeze_Mode_supp    = 1                 ;Freeze Mode supported
Sync_Mode_supp      = 1                 ;Sync Mode supported
Auto_Baud_supp      = 1                 ;Automatic Baud Search supported 
Set_Slave_Add_supp  = 1                 ;Set Slave-Adress via Bus supported
User_Prm_Data_Len   = 0
Min_Slave_Intervall = 10                ; * 100 ys
Modular_Station     = 1                 ;Modular Station
Max_Module          = 64                ;supports max. 64 Modules
Max_Input_Len       = 128               ; max. 128 Byte Input
Max_Output_Len      = 128               ; max. 128 Byte Output
Max_Data_Len        = 256

Slave_Family        = 5                 ;Controller

Max_Diag_Data_Len   = 15

Bitmap_Device       = "UMC1601" 

;                 INPUT MODULES
Module = "SPACE" 0x00
EndModule

Module = " 1 Word IN    " 0x50
EndModule
Module = " 2 Word IN    " 0x51
EndModule
Module = " 3 Word IN    " 0x52
EndModule
Module = " 4 Word IN    " 0x53
EndModule
Module = " 5 Word IN    " 0x54
EndModule
Module = " 6 Word IN    " 0x55
EndModule
Module = " 7 Word IN    " 0x56
EndModule
Module = " 8 Word IN    " 0x57
EndModule
Module = " 9 Word IN    " 0x58
EndModule
Module = "10 Word IN    " 0x59
EndModule
Module = "11 Word IN    " 0x5A
EndModule
Module = "12 Word IN    " 0x5B
EndModule
Module = "13 Word IN    " 0x5C
EndModule
Module = "14 Word IN    " 0x5D
EndModule
Module = "15 Word IN    " 0x5E
EndModule
Module = "16 Word IN    " 0x5F
EndModule

Module = " 1 Word Block IN  " 0xD0
EndModule
Module = " 2 Word Block IN  " 0xD1
EndModule
Module = " 3 Word Block IN  " 0xD2
EndModule
Module = " 4 Word Block IN  " 0xD3
EndModule
Module = " 5 Word Block IN  " 0xD4
EndModule
Module = " 6 Word Block IN  " 0xD5
EndModule
Module = " 7 Word Block IN  " 0xD6
EndModule
Module = " 8 Word Block IN  " 0xD7
EndModule
Module = " 9 Word Block IN  " 0xD8
EndModule
Module = "10 Word Block IN  " 0xD9
EndModule
Module = "11 Word Block IN  " 0xDA
EndModule
Module = "12 Word Block IN  " 0xDB
EndModule
Module = "13 Word Block IN  " 0xDC
EndModule
Module = "14 Word Block IN  " 0xDD
EndModule
Module = "15 Word Block IN  " 0xDE
EndModule
Module = "16 Word Block IN  " 0xDF
EndModule


;                 OUTPUT MODULES
Module = " 1 Word OUT    " 0x60
EndModule
Module = " 2 Word OUT    " 0x61
EndModule
Module = " 3 Word OUT    " 0x62
EndModule
Module = " 4 Word OUT    " 0x63
EndModule
Module = " 5 Word OUT    " 0x64
EndModule
Module = " 6 Word OUT    " 0x65
EndModule
Module = " 7 Word OUT    " 0x66
EndModule
Module = " 8 Word OUT    " 0x67
EndModule
Module = " 9 Word OUT    " 0x68
EndModule
Module = "10 Word OUT    " 0x69
EndModule
Module = "11 Word OUT    " 0x6A
EndModule
Module = "12 Word OUT    " 0x6B
EndModule
Module = "13 Word OUT    " 0x6C
EndModule
Module = "14 Word OUT    " 0x6D
EndModule
Module = "15 Word OUT    " 0x6E
EndModule
Module = "16 Word OUT    " 0x6F
EndModule

Module = " 1 Word Block OUT  " 0xE0
EndModule
Module = " 2 Word Block OUT  " 0xE1
EndModule
Module = " 3 Word Block OUT  " 0xE2
EndModule
Module = " 4 Word Block OUT  " 0xE3
EndModule
Module = " 5 Word Block OUT  " 0xE4
EndModule
Module = " 6 Word Block OUT  " 0xE5
EndModule
Module = " 7 Word Block OUT  " 0xE6
EndModule
Module = " 8 Word Block OUT  " 0xE7
EndModule
Module = " 9 Word Block OUT  " 0xE8
EndModule
Module = "10 Word Block OUT  " 0xE9
EndModule
Module = "11 Word Block OUT  " 0xEA
EndModule
Module = "12 Word Block OUT  " 0xEB
EndModule
Module = "13 Word Block OUT  " 0xEC
EndModule
Module = "14 Word Block OUT  " 0xED
EndModule
Module = "15 Word Block OUT  " 0xEE
EndModule
Module = "16 Word Block OUT  " 0xEF
EndModule