Automation

flexible and customised solutions

Drive Solutions

THE ORIGINAL. BE SAFE.

The company EMG –

a reliable employer for more than 70 years!

Solutions

to optimise your process and product quality!

ELDRO® Direct current series

Areas of application

ELDRO® DC devices are used in systems with an existing direct current power supply. The devices must be connected electrically in parallel to the motors. An electrical connection of the ELDRO® motors in series is not possible.

The ELDRO® DC series is also used to open brakes in the event of a voltage breakdown of the three-phase supply. In this case, these devices are installed in the brake as an additional brake thruster. These devices can then be supplied with a direct current voltage, for example, from a battery. This, for example, enables loads in the lifting unit to be lowered and set down safely.

Type Lifting force Stroke path** Power consumption Current consumption at 220 V DC Switching frequency in S3 mode Weight
Eg 50/... 500 N 60 – 120 mm 350 W 1,60 A 600 – 1.000 c/h* 27 – 31 kg*
Eg 80/... 800 N 60 – 120 mm 330 W 1,50 A 600 – 1.000 c/h* 27 – 31 kg*
Eg 121/... 1.250 N 60 – 120 mm 330 W 1,50 A 500 – 1.000 c/h* 43 – 44 kg*
Eg 201/... 2.000 N 60 – 120 mm 430 W 2,00 A 500 – 1.000 c/h* 43 – 44 kg*
Eg 301/... 3.000 N 60 – 120 mm 470 W 2,20 A 400 – 800 c/h* 43 – 44 kg*

* depending on stroke path   ** others available on request   
Stroke work (N cm) = lifting force x stroke path

Technical details are available on request.